REGENERATING RUBBER / RECLAIMED RUBBR PRODUCING LINE: from waste tyre to regenerating rubber GENERAL the processing step: waste tyre -----rubber powder------separate steel wire and nylon fiber------devulcanizing---prerefiner----strainer----refiner---reclaimed rubber sheet(regenerating rubber). 1. WASTE TYRES TO RUBBER POWDER This production line including main machine and accessorial equipment, it is used for recycling scrap-tire (steel tyre and textile tyre), separate the steel wire and nylon fiber. the final product is rubber powder , fiber and steel. function: 1. save production cost. it is full automatic production line,. for the whole line only need 2-3 workers per shaft capacity about 500kg per hour for 10-30 mesh rubber powder, 2. lower maintance all blader used in high quality alloy steel, forged and high frequency treatment. it has long life. never need replaced! when it is wear, we can repair the blade by welding, the reparied blade same as the new one! 3. no pollution noise <=80 dBa. it is in normal temperature and only physical process, so no dust, no bad smell. 4. process step: pull out the tyre steel bead----cut the big tyre into 2-4 pcs----shred the big block into 50*50mm-----crush into 10-30 mesh-----separate steel wire------separate fiber----pure rubber powder
Audited Supplier 
){kind=link}