Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine
Brief introduction of Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine:
Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine is used to produce the waste tyre into rubber powder or rubber crumb. It can treat both radial tyre and bias tyre and get rid of the nylon or steel in the waste tyre. Waste tyre production line machine consist of rubber crusher, ring cutter, strip cutter, block cutter, press loop machine, rubber screen, magnetic plant and conveyer. Through ring cutter, strip cutter, block cutter, processing tyre change into 3.5cm block. Second, using XKP-400/450/560 rubber crusher, it can be a colloidal. Then using rubber screen, magnetic plant and conveyer. Separate steel and powder. It can be made 10-30 mesh powder.
Advantages of Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine:
1. The reclaimed rubber could replace part of the new rubber to make up for shortfall in supply.
2. It could reduce production cost and improve economic performance of the company.
3. It is characterized by reducing environmental pollution, turning waste into useful product and having better social benefit.
Application scope of Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine:
1. To make production sheet of reclaimed rubber by desulfurization process.
2. Colorized resilient floor tile.
3. Waterproof roll, waterproof paint and waterproof sealing materials, etc.
4. Modified asphalt.
5. Modified plastics.
6. Construction of rubberized playgrounds, plastic runway and artificial grass; The application in this area has been doubled and redoubled.
7. Plugging and wall stabilizing of oil field.
8. Addition of railway track.
9. High-grade highway caulking mastic.
10. Pressing all kinds of soles.
11. Combining waste rubber powder with waste plastic powder to produce new environmentally friendly TPE (thermoplastic elastomeric)
Components of Waste Tyre And Rubber Recycle / Reclaimed Rubber Machine:
1. Tyre rim cutter (manual pre-processing procedures)
Cutting the whole tire into round crown, and the inner ring.
2. Tyre strip cutter
Cutting all kinds of tires, rubber block, sheet into bars.
3. Tyre block cutter
Cut the bars into blocks
4. Steel wire separator
Separating the steel ring from the tyre inner ring(recycled steel ring also produced by the scrap tyre recycling machine for rubber powder
5. Rubber powder machine (main machine)
Crush the rubber block into rubber powder and granule.
6. Main vibrating sieve
Separate the rubber granule first time (5-10 mesh)
7. Rubber powder separating sieve
Separating the finished rubber powder (10-40 mesh)
8. Magnetic extractor
Separating the small steel wire from the rubber powder. To get more pure quality higher rubber powder.
9. Conveyor equipment
To convey the rubber block to the crusher.
10. Rubber fine pulverizer
To fine pulverize 5-15 or 10-20 rubber granule into smaller mesh.
No |
Name |
model |
|
quantity |
Power |
|
whole tire pre-processing , you will get < 50*50MM rubber crumb |
|
1 |
Ring cutter |
QQJ-1200 |
|
1 |
5.5KW |
|
2 |
Loop machine |
YQJ-295 |
|
1 |
15KW |
|
3 |
Strip cutter |
QTJ-370 |
|
1 |
5.5 KW |
. |
4 |
Block cutter |
QKJ-200 |
|
1 |
11 KW |
|
Rubber powder processing: you will get 20-30 mesh rubber powder,at the same time, separate the fiber and steel wire |
5 |
Tyre crusher |
XK560 |
|
1 |
75 KW |
|
6 |
Big conveyor equipment |
BCL-8 |
|
1 |
2 KW |
. |
7 |
Small conveyor equipment |
BCL-3 |
|
1 |
1.1 KW |
|
8 |
Big Magnet separator |
BMS22 |
|
1 |
2.2 KW |
|
9 |
Small Magnet separator |
SMS-1 |
|
1 |
1.1 KW |
|
10 |
Big Shaking screen |
BSS-8 |
|
1 |
7.5 KW |
|
11 |
Small Shaking screen |
SSS-3 |
|
1 |
3 KW |
|
Total |
|
11 sets |
128.9KW |
){kind=link}