New Design Reclaimed Rubber Making Machine
Working process of reclaimed rubber making line:
Rubber powder-thermal oil boiler-devulcanizer-open mixing mill-rubber strainer machine-reclaimed rubber.
Rubber mxing mill is mainly used for warming, mixing and plastication of sizing.
ISO certificate
Direct manufacture since 1986
Good hard tooth surface reducer in use
Roller bearings in use
Low noise, long lifetime, save power up to 25%
Use for:
This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
Structure:
This machine consists of Base, Rack, Gland, Rollers, Bearing, Transmission device, Lubrication device, Decelerator, Adjustment device of the roller temperature, Emergency shutdown device and brake rigging and etc.
Features of open mixing mill machine:
1'Two rollers are made from Chilled Cast Iron, smooth surface is highly polished and scratch proof by cutting knife: High hardness(68-75HSD) and wear-resistant;
2'The roller is hollow structure, which is for adjusting the temperature of the rollers by steam or cooling water in term of different request, Circulation of steam and cooling water is provided through the rolls to control the temperature;
3'There are two kinds of Nip adjustment mode for option: Manual or electric;
4'There are three kinds of Main bearings for option: Bearing or Copper bush or Nylon bush;
5'Machine will be tripped off if overloaded to protect valuable electrical circuit;
6'All electrical connections are well, short circuits is impossible by any means.
7'It can be with Stock Blender, or can provide provision to fit stock blender in future.
8'Provision for opening of Nip Guard is provided for the purpose of cleaning of rollers and nip;
9'Hand Operated Safety Switch is provided;
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}